Pressure switch
A pressure switch is a simple pressure control device. When the measured pressure reaches the rated value, the pressure switch can issue an alarm or control signal.
Category：
Keywords：
Pressure switch
Inquiiy
Product introduction
Introduction
A pressure switch is a simple pressure control device. When the measured pressure reaches the rated value, the pressure switch can issue an alarm or control signal.The working principle of the pressure switch is: when the measured pressure exceeds the rated value, the free end of the elastic element is displaced, and the switching element is pushed directly or after comparison to change the on-off state of the switching element to achieve the purpose of controlling the measured pressure.
Technical parameters
Range range: -100kPa~200MPa;
Supply voltage: 12~35V DC, 220vAC
Output relay capacity: 380V 3A, 220V 5A, 24V DC 5A, etc.
Accuracy: better than 0.0.5%FS, 1%FS, etc.
Diaphragm: imported rubber/316L stainless steel diaphragm/piston sensor
Setting range: The full range range can be set
Shell protection level: IP67
Sampling rate: 10 times/second (the required speed can be customized according to customer needs).
Installation method: flange, thread
Ambient temperature: -40℃~+85℃
Ambient humidity: 5%-95%
Shell: die-cast aluminum, epoxy resin coating, outer cover with sealing gasket
Contact capacity: Vmax=380V, Imax=15A (please consult for special requirements)
Explosion-proof grade: Exd IICT6
next
next
Related products
Demand message