Float level switch
The float level controller belongs to a two-position level meter, which is suitable for the level control of liquid media in various open or pressure-bearing containers.
Category：
Keywords：
Float level switch
Inquiiy
Product introduction
Introduction
The float level controller belongs to a two-position level meter, which is suitable for the level control of liquid media in various open or pressure-bearing containers.When the liquid level reaches the lower limit, the controller outputs the lower limit switching signal and maintains the signal until the liquid level reaches the upper limit. At this time, the controller converts the control signal and outputs the upper limit signal. Similarly, the signal can be maintained until the liquid level reaches the lower limit, so that the liquid level can be maintained within the upper limit range.
Technical parameters
Switching capacity: 220VAC/5A, 110VAC/0.3A or 200VDC/0.3A (PP material)
Switch form: normally open (dry spring) or one normally open, one normally closed (micro switch)
Control range: 10mm, 550mm, 1000mm
Working temperature: -10～250℃
Working pressure: 1.5MPa
Wetted material: 1Cr18Ni9Ti, PP
Applicable specific gravity: 0.65
Installation method: flange, thread
Protection level: IP65
Explosion-proof grade: Ex d IIBT4
prev
prev
Related products
Demand message