Microwave level switch
The microwave level switch is composed of three electrically isolated units: a transmitter, a receiver and an amplifier, and the transmitter and receiver are installed in pairs with each other.
Category：
Keywords：
Microwave level switch
Inquiiy
Product introduction
Introduction
The microwave level switch is composed of three electrically isolated units: a transmitter, a receiver and an amplifier, and the transmitter and receiver are installed in pairs with each other.In order to obtain good performance, it is necessary to ensure that the installation of the receiver and transmitter is firm and strictly controlled.The transmitter sends a microwave beam to a receiver with microwave detection capabilities. The microwave beam is sent 200 times per second. When a microwave-absorbing material appears on the same plane of the receiver, the microwave beam will not reach the receiver, so the receiver will not be able to detect the microwave beam.
Technical parameters
Split amplifier: the maximum cable length is 50M
Measuring range: 20cm--100m
Voltage: 220V, 24VDC
Material temperature: 700℃
Power: <5VA
Microwave energy density: 20µW/cm2
Microwave signal: 10.525GHz typical Arctic magnetic field emission angle is about 30 degrees
Ambient temperature: -30℃~70℃
Installation: thread installation, bracket installation, flange pipe installation
Output: Relay contact output, SPDT-5A@240VAC
Communication protocol: HART, MODBUS, GOSHAWK
Protection level: IP67
prev
next
prev
next
Related products
Demand message